The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road width is 10 m, then the minimum length of the transition curve on either end will be

The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road wi

The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road width is 10 m, then the minimum length of the transition curve on either end will be

A. 180 m
B. 125 m
C. 80 m
D. 30 m

The correct answer is option C. 80 m. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road width is 10 m, then the minimum length of the transition curve on either end will be

Getting Info...

About the Author

Mr. Ashutosh Nautiyal is a student who is pursuing his post-graduation (MBA in Infrastructure Development and Management) from SCMHRD, Pune. He has done his B.Tech in Civil Engineering from BTKIT, Dwarahat and his schooling from Omkarananda Saraswat…

Civil Engineering With Akhand Dutta

The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road width is 10 m, then the minimum length of the transition curve on either end will be

The maximum superelevation to be provided on a road curve is 1 in 15. If the rate of change of superelevation is specified as 1 in 120 and the road width is 10 m, then the minimum length of the transition curve on either end will be

The correct answer is option C. 80 m. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

About the Author

Post a Comment

A point P is 50 mm away from both the reference planes. Draw its all possible projections.

State the quadrants in which the following points lie. (i) P, its Top view is 40 above x-y; its FV 20 below the top view (ii) Q, both of its views coincide at a point 40 below x-y.

If the fractional difference between the core and cladding refractive indices of the optical fiber is 0.0135 and numerical aperture NA is 0.2425, calculate the refractive indices of core and cladding materials.

Calculate the probability of an electron occupying an energy level 0.02 eV above the Fermi level at 200 K and 400 K in a material.

A step index fiber has core refractive index 1.466, cladding refractive index 1.46. If the operating wavelength of the rays is 0.85 μm, calculate the cutoff parameter or normalized frequency and the number of modes which the fiber will support. The diameter of core is 50 μm.