The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum length of the transition curve?

The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum

The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum length of the transition curve?

A. 174 m
B. 85 m
C. 140 m
D. 120 m

The correct answer is option C. 140 m. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum length of the transition curve?

Getting Info...

About the Author

Mr. Ashutosh Nautiyal is a student who is pursuing his post-graduation (MBA in Infrastructure Development and Management) from SCMHRD, Pune. He has done his B.Tech in Civil Engineering from BTKIT, Dwarahat and his schooling from Omkarananda Saraswat…

Civil Engineering With Akhand Dutta

The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum length of the transition curve?

The design speed of a highway is 80 kmph and the radius of the circular curve is 150 m in plain topography. Which one of the following is the minimum length of the transition curve?

The correct answer is option C. 140 m. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

About the Author

Post a Comment

A step index fiber has core refractive index 1.466, cladding refractive index 1.46. If the operating wavelength of the rays is 0.85 μm, calculate the cutoff parameter or normalized frequency and the number of modes which the fiber will support. The diameter of core is 50 μm.

A point P is 50 mm away from both the reference planes. Draw its all possible projections.

Q.Explain the formation of Newton's rings with a ray diagram and derive the expression for determination of wavelength of light using Newton's ring experiment.

Elongation of a Conical Bar due to it's Self-Weight | QnA | Strength of Material | Solid Mechanics | By Akhand Dutta

The refractive indices of core and cladding materials of a step index fibre are 1.48 and 1.45, respectively. Calculate: (i) numerical aperture, (ii) acceptance angle, and (iii) the critical angle at the core-cladding interface and (iv) fractional refractive indices change.