Which one of the following criteria is used for obtaining the value of modulus of subgrade reaction from the plate bearing test data?

A. Slope of pressure settlement graph
B. Pressure corresponding to the settlement of 1.25 mm
C. Pressure corresponding to a pressure of 1.25 kg per square cm
D. Pressure corresponding to the settlement of 1.50 mm

The correct answer is option B. Pressure corresponding to the settlement of 1.25 mm. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

Which one of the following criteria is used for obtaining the value of modulus of subgrade reaction from the plate bearing test data?

Getting Info...

About the Author

Mr. Ashutosh Nautiyal is a student who is pursuing his post-graduation (MBA in Infrastructure Development and Management) from SCMHRD, Pune. He has done his B.Tech in Civil Engineering from BTKIT, Dwarahat and his schooling from Omkarananda Saraswat…

Civil Engineering With Akhand Dutta

Which one of the following criteria is used for obtaining the value of modulus of subgrade reaction from the plate bearing test data?

Which one of the following criteria is used for obtaining the value of modulus of subgrade reaction from the plate bearing test data?

The correct answer is option B. Pressure corresponding to the settlement of 1.25 mm. Can you explain this answer in the comments?

Book For Transportation Engineering MCQs and Solved Question - CLICK TO VIEW

About the Author

Post a Comment

A point P is 50 mm away from both the reference planes. Draw its all possible projections.

Q.Explain the formation of Newton's rings with a ray diagram and derive the expression for determination of wavelength of light using Newton's ring experiment.

The refractive indices of core and cladding materials of a step index fibre are 1.48 and 1.45, respectively. Calculate: (i) numerical aperture, (ii) acceptance angle, and (iii) the critical angle at the core-cladding interface and (iv) fractional refractive indices change.

Elongation of a Conical Bar due to it's Self-Weight | QnA | Strength of Material | Solid Mechanics | By Akhand Dutta

A step index fiber has core refractive index 1.466, cladding refractive index 1.46. If the operating wavelength of the rays is 0.85 μm, calculate the cutoff parameter or normalized frequency and the number of modes which the fiber will support. The diameter of core is 50 μm.